5. Use a screw driver to push each of the clamps into the dome camera until the spring is fully
compressed, then turn the clamp into the ready position.
(Optional) Configuring SD Card Storage
To use the camera's SD card storage feature, you must insert an SD card into the card slot.
It is recommended that the SD card have a capacity of 8 GB or more and a write speed of class 610 or
better. If the SD card does not meet the recommended capacity or write speed, the recording performance
may suffer and result in the loss of frames or footage.
1. Insert an SD card into the camera.
CAUTION — Do not force the SD card into the camera or you may damage the card and the
camera. The SD card can only be inserted in one direction.
2. Access the camera's web interface to enable the onboard storage feature. For more information, see
the Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
(Optional) Cutting the Mounting Hole
This procedure is not required if you are planning to install the camera with a metal ceiling panel.
(Optional) Configuring SD Card Storage
6