5
Other Setup Tasks
To start the Data Acquisition program
To start the Data Acquisition program
You can start the Data Acquisition program in any of these ways:
• Double-click the Data Acquisition icon in the Agilent MassHunter program
• Windows 7: Click Start > All Programs > Agilent > MassHunter
• Windows 10: Click Start > All apps > Agilent MassHunter LCMS Acq >
Do not start Data Acquisition as administrator. (Do not right-click Data Acquisition
C A U T I O N
and select Run as administrator.)
To stop MassHunter Engines
1 Close the Data Acquisition program.
2 Right-click the Engine Launcher icon in the system tray.
3 Click Shutdown Engines to stop the engines.
To start the MassHunter Engines, restart the Data Acquisition program.
Alternatively, to start the MassHunter Engines without starting the Data
Acquisition program, click Start Engines.
84
group, or
Workstation > Data Acquisition.
Data Acquisition
Agilent 6400 Series Triple Quad LC/MS System Installation Guide