Software Installation And Configuration - Agilent Technologies 6490 Installation Manual

Agilent 6400 Series Triple Quadrupole LC/MS System
Installation Guide
2

Software Installation and Configuration

Step 1. Set up the computer system
Step 2. Check PC network card configuration
Step 3. Prepare for installation
Step 4. Install the Data Acquisition program
Step 5. Install the Qualitative Analysis program
Step 6. Install the Quantitative Analysis program
Step 7. Install Microsoft Excel (optional)
Step 8. Install Service Packs for Data Acquisition
Step 9. Install Quantitative Analysis Reporting
Step 10. Configure Excel for MassHunter (optional)
Step 11. Configure the instrument
Step 12. Copy the support folder to the computer
Step 13. Confirm the LC firmware revision
Step 14. Finish the installation
If you purchased a bundled Triple Quadrupole LC/MS system, the MassHunter
Workstation software has been installed for you. In this case, start at
Install the Data Acquisition
If you are upgrading MassHunter software that is already installed, refer to
the Upgrade Guide that came with your system.
36
38
42
47
program".
37
39
40
41
41
41
42
42
44
46
"Step 4.
35