Other Setup Tasks - Agilent Technologies 6490 Installation Manual

Agilent 6400 Series Triple Quadrupole LC/MS System
Installation Guide
5

Other Setup Tasks

To start the Data Acquisition program
To stop MassHunter Engines
To stop MassHunter processes in case of unrecoverable errors
To view the log book
To configure the network interface card
To remove the MassHunter Workstation software
To reconfigure the instrument
To confirm the collision cell gas flow rate (6470A and 6495A/B only)
This chapter contains tasks that are related to setting up your Triple
Quadrupole LC/MS.
For complete information on using the your Triple Quadrupole LC/MS, refer to
the list of resources found in the Quick Start Guide.
84
84
85
87
89
85
88
91
83