Step 2. Prepare To Install The System - Agilent Technologies 6490 Installation Manual

1 Instrument Installation

Step 2. Prepare to install the system

Step 2. Prepare to install the system

Before you begin, check that you have these parts:
• Utility knife and needle nose pliers
1 Unpack and set up the Triple Quadrupole LC/MS.
Figure 4
10
a Cut the tie wraps around the package. See
Triple Quadrupole LC/MS shipping container
b Lift the boxes off the top of the instrument. See
Agilent 6400 Series Triple Quad LC/MS System Installation Guide
Figure 4.
Figure 5.