2
Software Installation and Configuration
Step 12. Copy the support folder to the computer
Step 12. Copy the support folder to the computer
In this step, you copy the \Support folder from the Data Acquisition
installation disk to the D:\MassHunter\ folder.
1 In a Windows Explorer window, open the installation disk drive.
2 Right-click the Support folder and click Copy.
3 Right-click the D:\MassHunter folder and click Paste.
4 In Windows Explorer, right-click the D:\MassHunter\Support folder and click
Figure 27
5 Clear the Read-only check box, and then click Apply.
44
Properties.
Support Properties dialog box
The Confirm Attribute Changes dialog box is displayed.
Agilent 6400 Series Triple Quad LC/MS System Installation Guide