Table of Contents
Advertisement
Step 4. Install the Data Acquisition program
The Data Acquisition program is pre-installed on the shipping PC when
ordered together with the instrument as a bundle. If the MassHunter
workstation software is already installed, do only these steps:
The installation of the Data Acquisition program includes installation of
Optimizer and Study Manager. Do not separately install these programs.
If you are installing or upgrading Data Acquisition to run in Compliance mode,
refer also to the Data Acquisition Compliance Mode Quick Start Guide.
1 Check that no other program is running on your system, including Windows
2 Put the Data Acquisition installation disc into the disc drive.
3 Click Install MassHunter Data Acquisition Software, and then follow the
Agilent 6400 Series Triple Quad LC/MS System Installation Guide
•
If your system includes an Agilent 1290 Infinity LC Injector HTC/HTS,
start the installation program
driver
(step
4).
•
Update the firmware
•
Continue at
"Step 7. Install Microsoft Excel (optional)"
Update.
The welcome page appears.
instructions to install the software.
•
Click Install in the first installer page.
•
In the License Agreement page, click I accept the terms in the License
Agreement, and then click Next.
•
In the Choose destination location page, click Next to accept the default
destination location.
The default is C:\Program Files (×86)\Agilent\MassHunter\Workstation\Acq.
•
If prompted, in the Choose location for customer data files screen,
check that the default of D:\MassHunter is displayed in the text box,
and then click Next.
•
In the Ready to install page, click Install.
The Setup Status page now appears.
Software Installation and Configuration
Step 4. Install the Data Acquisition program
(step 1
and
(step
5).
step
2), and then install the
on page 41.
2
39
Hide quick links:
Advertisement
Table of Contents
