Step 5. Install The Qualitative Analysis Program - Agilent Technologies 6490 Installation Manual

6400 series triple quadrupole lc/ms system
Hide thumbs Also See for 6490:
Table of Contents

Advertisement

2
Software Installation and Configuration

Step 5. Install the Qualitative Analysis program

4 If your system includes an Agilent 1290 Infinity LC Injector HTC/HTS, click
5 Update the firmware:

Step 5. Install the Qualitative Analysis program

• Refer to the Offline Qualitative and Quantitative Analysis Installation
You must use the Run as administrator option to install the program. Failure to do so
C A U T I O N
can result in an incomplete installation, which can cause the system to run unreliably.
Do not install any other MassHunter program until instructed to do so.
40
If you are asked to allow Agilent Technologies to install software on the
computer, click Yes.
If you get a message that indicates that the screen resolution is not set to
the required resolution, click OK.
If you see a Notepad window that prompts you to install other options,
close the Notepad window.
When the installation completion message is displayed, click Finish.
Install HTC/HTS Driver.
a Insert the Firmware installation media.
b Click Update MS Firmware in the welcome page.
Follow the instructions to update the firmware.
Guide to install the Qualitative Analysis program.
Agilent 6400 Series Triple Quad LC/MS System Installation Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

6495b64706460

Table of Contents