Step 2. Check Pc Network Card Configuration - Agilent Technologies 6490 Installation Manual

Step 2. Check PC network card configuration

1 Click Start > Control Panel, and then under Network and Internet, click
2 Click Change adapter settings.
3 From the list of network connections, double-click the network connection
4 Scroll down the list to Internet IP Protocol 4 (TCP/IPv4) (or Internet IP
Figure 24
Agilent 6400 Series Triple Quad LC/MS System Installation Guide
View network status and tasks.
If Control Panel displays in Small icons view, click Network and Sharing
Centers.
that corresponds to the instrument LAN connection.
Protocol), select it, and then click Properties.
LCMS Connection Properties dialog box - Networking tab
Software Installation and Configuration

Step 2. Check PC network card configuration

2
37