Emerson Unidrive M100 Control User Manual page 15

Safety Product Mechanical
information information installation
9 +24 V user output
Default function
Voltage tolerance
Maximum output current
Protection
10 Digital I/O 1
Default function
Type
Input / output mode controlled by ...
Operating as in input
Absolute maximum applied voltage range
Impedance
Input threshold
Operating as an output
Nominal maximum output current
Maximum output current
Common to all modes
Voltage range
Sample rate
11 Digital Input 2
12 Digital Input 3
13 Digital Input 4
Terminal 11 default function
Terminal 12 default function
Terminal 13 default function
Type
Voltage range
Absolute maximum applied voltage range
Impedance
Input threshold
Sample rate
41
Relay contacts
42
Default function
Contact voltage rating
Contact maximum current rating
Contact minimum recommended rating
Contact type
Default contact condition
Update rate
To prevent the risk of a fire hazard in the event of a fault, a fuse or other over-current protection must be installed in the relay circuit.
WARNING
Unidrive M100 / M101 Control User Guide
Issue Number: 1
Electrical Getting Basic
installation started parameters
Supply for external digital devices
±20 %
100 mA
Current limit and trip
AT ZERO FREQUENCY output
Positive logic digital input, positive logic voltage source output.
PWM or frequency output modes can be selected.
Pr 08.031
-8 V to +30 V relative to 0V
6.8 kΩ
10 V ±0.8 V (IEC 61131-2)
50 mA
100 mA (total including +24 Vout)
0V to +24 V
1 ms when routed to destinations Pr 06.035 or Pr 06.036, otherwise 4 ms
DRIVE ENABLE input
RUN FORWARD input
RUN REVERSE input
Positive logic only digital inputs
0V to +24 V
-18 V to +30 V relative to 0V
6.8 kΩ
10 V ±0.8 V (IEC 61131-2)
1 ms when routed to destinations Pr 06.035 or Pr 06.036, otherwise 4 ms.
Drive OK indicator
240 Vac, Installation over-voltage category II
2 A AC 240 V
4 A DC 30 V resistive load
0.5 A DC 30 V inductive load (L/R = 40 ms)
12 V 100 mA
Normally open
Closed when power applied and drive OK
1 ms
Running the
Optimization NV Media Card
motor
Advanced
Diagnostics UL Listing
parameters
15