Table of Contents
Advertisement
1.4 Crankshaft transport locking device
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 10-60 Nm
Torque wrench, 60-320 Nm
Engine oil
Transport locking device
Note:
The locking device protects the crankshaft bearings from shocks and vibration damage during engine
transport.
For installation and removal of the transport locking device, follow the instructions
below:
1.
The transport locking device must remain installed as long as possible during engine installation in order
to avoid damage.
2.
Starting or barring the engine is allowed only with the transport locking device removed. If the generator
is already mounted on the engine, ensure that the transport locking device of the generator is also re‐
moved.
3.
Prior to every engine transport, the transport locking device must be reinstalled on both sides according
to the instructions.
4.
If the engine is to be moved together with the generator, the transport locking device for the generator
must also be installed.
Removing guard plates and engine
mounting brackets (if applicable)
on driving end (KS)
1.
Remove screws (4) om both sides and take
off with washers (3), guard plates (1) and
engine mounting brackets (2).
2.
Store the removed parts of the transport
locking device carefully for possible reuse.
8 | Safety | MS150054/02E 2012-02
Part No.
Qty.
F30510423
1
F30047446
1
Advertisement
Table of Contents
