Deleting Scan Destinations; Testing Transmission - Ricoh SP 220SNw User Manual

4. Select the entry to modify, and then click [Change].
5. Modify settings as necessary.
6. Enter the administrator password if required.
7. Click [Apply].
8. Close the web browser.
• You can unassign a Quick Dial entry from a One-touch button from the [Quick Dial Destination]
page (only SP 221SF, SP 220SFNw, and SP 221SFNw). To do this, select the desired entry, click
[Delete], and then click [Apply] again on a confirmation page.

Deleting Scan Destinations

This section describes how to delete registered destinations.
1. Start the web browser and access the machine by entering its IP address.
2. Click [Scan Destination].
3. Click the [E-mail Address], [FTP], or [Folder] tab.
4. Select the entry to delete, and then click [Delete].
5. Confirm that the entry you have selected is the entry that you want to delete.
6. Enter the administrator password if required.
7. Click [Apply].
8. Close the web browser.

Testing Transmission

• When a USB flash memory device is inserted into the machine, scanned documents will be stored
in the USB flash memory device. Confirm that there are no USB flash memory devices inserted into
the machine.
1. Place the original on the exposure glass or in the ADF.
Registering Scan Destinations
91