Ricoh SP 220SNw User Manual page 199

Item
MAC Address Displays the machine's MAC address.
Current Displays detailed information about
Connection the connection, such as the SSID and
the wireless signal strength.
Input SSID Displays the procedure for manually
connecting to a wireless LAN. It leads
you step-by-step through configuring
the settings for connecting with a
wireless LAN.
WPS Connects with one touch using WPS
(Wi-Fi Protected Setup). For details,
see Setup Guide.
Wi-Fi Direct Enables devices to communicate
directly with each other without using a
central access point.
IPv4 Configuration
Item
DHCP Sets the machine to receive its IPv4
address, subnet mask, and default
gateway address automatically from a
DHCP server.
IP Address Specifies the machine's IPv4 address
when DHCP is not used.
Use this menu to check the current IP
address when DHCP is used.
Subnet Mask Specifies the machine's subnet mask
when DHCP is not used.
Use this menu to check the current
subnet mask when DHCP is used.
Description
Description
Network Settings
Value
–
–
–
• PBC
• PIN
–
Value
• Inactive
• Active
Default: [Active]
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
197