Ricoh SP 220SNw User Manual page 285

10. Wait until the machine restarts.
11. Press the [User Tools] key.
12. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
13. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock]
under [Admin. Tools] menu.
14. Press the [ ] or [ ] key to select [Wi-Fi], and then press the [OK] key.
15. Press the [ ] or [ ] key to select [WPS], and then press the [OK] key.
16. Press the [ ] or [ ] key to select [PIN], and then press the [OK] key.
17. Check the PIN code.
Write down the PIN code in case you might forget it.
18. Enter the machine's PIN code (8 digits) on the router (access point)'s web page.(The web
page accessed in Step 2)
19. Execute WPS (PIN system) from the router (access point)'s web page.
20. Press [Connect].
"Please wait for 2 minutes" and connecting with PIN method starts.
21. Check the result.
• Connection has succeeded:
Press [EXIT] to return to the screen displayed in Step 16, and then press the [User Tools] key to
return to the initial screen.
Configuring the Wi-Fi settings is complete.
• Connection has failed:
Press [EXIT] to return to the screen displayed in Step 16. Check the configuration for the router
(access point), then try the connection again.
Connecting the Machine to a Wireless Network
283