Ricoh SP 220SNw User Manual page 20

1. Guide to the Machine
No.
1 Input Tray for the ADF
2 Auto Document Feeder
(Exposure Glass Cover)
3 Line and TEL Port
4 USB Port
5 Ethernet Port
6 Rear Cover
7 Tray Cover
8 Stop Fence
9 Tray 1
10 Bypass Tray
11 Front Cover
12 USB Flash Disk Port
13 Control Panel
14 ADF Cover
15 Exposure Glass
• If it is difficult to take printed paper out of the output tray, you can lift the control panel and make it
easier to take the printed paper out.
18
Name
Place stacks of originals here. They will feed in automatically. This
tray can hold up to 35 sheets of plain paper.
The ADF is integrated with the exposure glass cover. Open this
cover to place originals on the exposure glass.
• Upper port: Port for external telephone connection.
• Lower port: G3 (analog) line Interface port for telephone line
connection.
For connecting the machine to a computer using a USB cable.
For connecting the machine to the network using a network
interface cable.
Open this cover to remove jammed paper.
Attach this cover when you extend the tray.
Raise this fence to prevent paper from falling off.
This tray can hold up to 150 sheets of plain paper.
This tray can hold one sheet of plain paper.
Open this cover to replace the print cartridge or remove jammed
paper.
Insert a USB flash disk to store scanned files using the Scan to USB
function.
Contains a screen and keys for machine control.
Open this cover to remove originals jammed in the ADF.
Place originals here sheet by sheet.
Description