Using A Pin Code - Ricoh SP 220SNw User Manual

11. Configuring Network Settings Using OS X
Press [EXIT] to return to the screen displayed in Step 15, and then press the [User Tools] key to
return to the initial screen.
Configuring the Wi-Fi settings is complete.
• Connection has failed:
Press [EXIT] to return to the screen displayed in Step 15. Check the configuration for the router
(access point), then try the connection again.

Using a PIN Code

A router (access point) is needed to set up a connection. To establish a connection using the PIN code,
use a computer that is connected to the router (access point).
Before doing the following procedure, install the printer driver according to the procedure on page 278
"Installing the Printer Driver".
Make sure the Ethernet cable is not connected to the machine.
1. Check that the router (access point) is working correctly.
2. Open the PIN code configuration window (web page) for the router (access point) on
your computer.
3. Press the [User Tools] key.
4. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
5. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock]
under [Admin. Tools] menu.
6. Press the [ ] or [ ] key to select [Wi-Fi], and then press the [OK] key.
7. Select [Wi-Fi Enable], and then press the [OK] key.
8. Press the [ ] or [ ] key to select [Enable], and then press the [OK] key.
9. Press the [User Tools] key to return to the Initial screen.
282
DSH210