Saddle Stitcher Unit - Toshiba MJ-1027 Service Manual

B.

SADDLE STITCHER UNIT

1. Removing the Saddle Stitcher Unit
1) Remove the grate-shaped lower guide (see
I-A-7).
2) Remove the right guide assembly (see I-A-
8).
3) Remove the front lower door assembly (see
II-A-1).
4) Remove the rear lower cover (see II-A-2).
5) Remove the front inside cover (see II-A-3).
6) Remove the saddle stitcher delivery tray as-
sembly (see II-A-4).
7) Remove harness stop [3] and harness lead
[4].
8) Remove the upper delivery guide (see II-
A-5).
9) Remove the PCB cover (see II-A-6).
10) Disconnect two connectors [1] and remove
the two screws [2].
CHAPTER 4 MECHANICAL CONSTRUCTION
Figure 4-209
Figure 4-210
[1]
[2]
[4]
[3]
4-17