Specifications - Toshiba MJ-1027 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
II.

SPECIFICATIONS

A.

Specifications

1. Finisher Unit
Item
Stacking method
Stacking orientation
Stacking size
Paper weight
Bins
Modes
Stacking capacity
Size mixing
Stacking mixing
Notes:
1. Approximate when computed with reference to 80 g/m
2. Alignment may not be correct if 750 or more small-size sheets are stacked.
3. The accuracy of the stack height is ± 7 mm/0.28 in.
1-2
Tray-1 and -2: by lifting tray
Face-down
AB: A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
Inch: LD, LG, LT, LT-R, ST-R, COMPUTER
60 to 256 g/m 2 (16 lb. Bond to 141.4 lb. Index)
Tray-1 and -2
Non-sort: tray-1 and -2
Sort: tray-1 and -2
Staple sort: tray-1 and -2
Non sort A4, B5, LT
Non staple sort A3, A4-R, A5-R,
B4, B5-R, LD,
LG, LT-R, ST-R,
FOLIO, COMPUTER
Staple sort A4, B5, LT
A3, A4-R, B4,
LD, LG, LT-R,
FOLIO, COMPUTER
Size mixing: 74 mm or less (500 sheets)
Staple mixing: 74 mm/50 sets or less (500 sheets)
Face-down
2
(21.3 lb. Bond) paper.
Table 1-201
Description
250 mm (2000 sheets)
140 mm (1000 sheets)
110 mm/100 sets (750 sheets)
74 mm/50 sets (500 sheets)
(Note 1)
(Note 1)
(Note 1, 2)
(Note 1, 2)
(Note 1)
(Note 1)