Toshiba MJ-1027 Service Manual page 52

2. Flow of Job Offset Operations
1) The swing guide moves up and, at the same time, the feed belts move the sheet to the stapling
tray.
2) The alignment plate shifts the sheet to the front.
3) The swing guide moves down and, at the same time, the delivery roller delivers the sheet.
Offset sheet
CHAPTER 2 FINISHER UNIT BASIC OPERATION
Swing guide
Offset sheet
Tray-1/-2
Delivery
roller
Stapling tray
Figure 2-220
Existing stack
Figure 2-221
Swing guide
Delivery
Tray-1/-2
roller
Stapling tray
Figure 2-222
Feed roller 2
Knurled belts
Stopper
Alignment plate
Offset sheet
Feed roller 2
Knurled belts
Stopper
2-23