Pcbs - Toshiba MJ-1027 Service Manual

4) Remove the two screws [6] from the sta-
pler cover [5], and remove the stapler.
C.

PCBs

1. Removing the Finisher Controller
PCB
1) Remove the rear cover.
2) Disconnect the 17 connectors [1].
3) Remove the four screws [2], and remove
the finisher controller PCB [3].
CHAPTER 4 MECHANICAL CONSTRUCTION
[5]
Figure 4-130
[2]
[2]
Figure 4-131
[6]
[3]
[2]
[1]
4-13