Feed/Drive System; Outline - Toshiba MJ-1027 Service Manual

CHAPTER 2 FINISHER UNIT BASIC OPERATION
II.

FEED/DRIVE SYSTEM

A.

Outline

The finisher is designed to operate according to the commands from its host machine to deliver
arriving copies to trays in the appropriate mode: simple stacking, job offset, stapling.
See Figure 2-201 for a diagram of the three modes of delivery (four for the Saddle Stitch
Finisher).
Method of delivery
Normal delivery tray
Normal delivery tray
2-10
Normal
delivery
Saddle stitch delivery (Saddle Stitch Finisher only)
Figure 2-201
Figure 2-202
Simple stacking
Job offset
Staple Front diagonal
Rear 1-point
Rear diagonal
2-point
To saddle stitcher unit
(Saddle Stitch Finisher)