C.
PCBs
1.
Removing the Saddle Stitcher
Controller PCB
1) Remove the PCB cover (see II-A-6).
2) Remove the four screws [1] and 14 connec-
tors [2], and remove the saddle stitcher con-
troller PCB [3].
CHAPTER 4 MECHANICAL CONSTRUCTION
[ 2 ] [ 3 ]
[ 1 ]
[ 1 ]
Figure 4-234
[ 2 ] [ 2 ]
[ 1 ]
[ 2 ]
[ 1 ]
4-27