Toshiba MJ-1027 Service Manual page 134

CHAPTER 4 MECHANICAL CONSTRUCTION
5. How to Lower the Tray -1/-2 Unit
1) Insert a screwdriver or similar object into
the hole [2] while supporting the tray as-
sembly [1].
2) Release the tray lift motor one-way gear,
and lower the tray -1/-2 unit.
6. Removing the Tray-1 Unit
1) Open the upper cover, and then remove the
end caps [1] and the slide guide [2].
2) Remove the prop upper cover [3] and the
prop lower cover [4].
3) Remove the harness band [1] of the tray-1
and -2 from the bracket [2]. Cut the har-
ness band [1] to separate the harnesses of
the tray-1 and -2.
Caution:
Replace the cut harness band with the new
one when assembling.
4) Disconnect 2 connectors [3] and remove 1
screw [4].
5) Disconnect 1 connector [5] from the bracket
[2].
6) Lift the tray-1 unit to remove.
4-4
[2]
Figure 4-107
[1]
[3]
[4]
Figure 4-108
[3]
[1]
Figure 4-109
[1]
[2]
[3]
[5]
[4]
[2]