Toshiba MJ-1027 Service Manual page 156

CHAPTER 4 MECHANICAL CONSTRUCTION
7. Removing the No.1 and No.2
Paper Deflecting Plates
1) Remove the rear cover (see I-A-2).
2) Remove the lower rear cover (see II-A-2).
3) Remove the claw [1] of the No.1 deflecting
plate bushing, and pull out the No.1 deflect-
ing plate shaft [2] toward the rear. (The pro-
cedure is the same for the No.2 paper de-
flecting plate.)
4) After detaching the front shaft of the No.1
paper deflecting plate [3] from the front side
plate, remove the No.1 paper deflecting
plate.
4-26
[1]
Figure 4-232
[3]
1
2
Figure 4-233
[2]