Toshiba MJ-1027 Service Manual page 83

CHAPTER 2 FINISHER UNIT BASIC OPERATION
b. Buffer Path
The delivery sensor does not detect paper when an equivalent of 772 mm has been fed after the
inlet sensor turned on.
Equivalent of 772 mm
Jam check
Inlet sensor (PI1)
Delivery sensor (PI3)
First feed motor (M1)
Second feed motor
(M8)
6. Delivery Sensor Stationary Jam
The sheet does not move past the delivery sensor when an equivalent of twice the feeding
length of the sheet has been fed after the delivery sensor turned on.
Equivalent of size x 2
Jam check
Delivery sensor (PI3)
Second feed motor
(M8)
Delivery motor (M2)
2-54
Jam check
Normal
Inlet sensor (PI1)
Delivery sensor (PI3)
First feed motor (M1)
Second feed motor
(M8)
Figure 2-262
Jam check
Normal
Delivery sensor (PI3)
Second feed motor
(M8)
Delivery motor (M2)
Figure 2-263
Equivalent of 772 mm
Jam
Equivalent of size x 2
Jam