Figure 3-4. Flowchart Of Hypothetical Program - HP 64700 User Manual

taken. Also, occurrence counts may only be specified with primary
branch expressions.
The following examples are based on a hypothetical program whose
flowchart is shown in figure 3-4.
Suppose there is a problem in the hypothetical program. You can iden-
tify two situations which cause this problem, but you are not quite sure
as to why the problem occurs, and you would like to trace the program
execution around either of these situations.
The first situation which causes the problem is when TRIG_STATE_1
occurs in PROCESS_1. The second situation is when
TRIG_STATE_2 occurs in PROCESS_2 (which may or may not be
called after PROCESS_1). Either state can occur in both processes
and in other processes in the program loop; the problem will only arise

Figure 3-4. Flowchart of Hypothetical Program

Accessing Full Analyzer Capability 3-18