Table of Contents
Advertisement
Mixed Clocks
The mixed clock mode is specified with the -m option to the tsck com-
mand. In this mode, the lower 8 channels of the pod (bits 0-7) are
latched with the slave clock, and the master clock gates the entire pod
(see figure 6-2).
If no slave clock has appeared since the last master clock, the data on
the lower 8 bits of the pod will be latched at the same time as the upper
8 bits. If more than one slave clock has appeared since the last master
clock, only the first slave data will be available to the analyzer (see fig-
ure 6-3).
Figure 6-3. Slave Clocks
Special Analyzer Topics 6-7
Advertisement
Table of Contents
