Figure 3-5. Drawing The Sequencer Diagram - HP 64700 User Manual

Term_1: If (PROCESS_1 occurs)
Term_2: If (TRIG_STATE_1 occurs before PROCESS_1_EXIT)
Else if (PROCESS_1_EXIT occurs before TRIG_STATE_1)
Term_3: If (PROCESS_2 occurs before PROCESS_3)
Else if (PROCESS_3 occurs before PROCESS_2)
Term_4: If (TRIG_STATE_2 occurs before PROCESS_3)
Else if (PROCESS_3 occurs before TRIG_STATE_2)
Term_5: Analyzer is triggered on entry.
No branches are made from this term.
Accessing Full Analyzer Capability 3-20
A pseudo-code algorithm of the sequencer follows.
Then go to Term_2.
Then trigger the analyzer, i.e., go to Term_5.
Then go to Term_3.
Then go to Term_4.
Then go to Term_1.
Then trigger the analyzer, i.e., go to Term_5.
Then go Term_1.

Figure 3-5. Drawing the Sequencer Diagram