Figure 4-2. Attaching Grabbers To Probe Wires - HP 64700 User Manual

Assembling the Analyzer Probe
The analyzer probe is a two-piece assembly, consisting of ribbon cable
and 18 probe wires (16 data channels and the J and K clock inputs) at-
tached to a connector. Either end of the ribbon cable may be con-
nected to the 18 wire connector, and the connectors are keyed so they
may only be attached one way. Align the key of the ribbon cable con-
nector with the slot in the 18 wire connector, and firmly press the con-
nectors together. (See figure 4-1.)
Each of the 18 probe wires has a signal and a ground connection. Each
probe wire is labeled for easy identification. Thirty-six grabbers are pro-
vided for the signal and ground connections of each of the 18 probe
wires. The signal and ground connections are attached to the pin in the
grabber handle. (See figure 4-2.)

Figure 4-2. Attaching Grabbers to Probe Wires

Using the External Analyzer 4-3