Using this Manual
This manual will show you how to use the HP 64700 series analyzer
with the firmware resident Terminal Interface.
This manual will:
Briefly introduce the analyzer and its features.
•
Show you how to use the analyzer in its simplest, power-up condi-
•
tion. From there, it will progressively show you how and why you
would use additional trace commands.
Show you how to use the external analyzer.
•
Show you how to cross-trigger between the emulation analyzer and
•
the external analyzer.
Show you how to specify analyzer clocks.
•
Show you how to save the analyzer configuration in a command file.
•
This manual will not:
Show you how to use the analyzer with the PC Interface; this is
•
done in the HP 64700 Emulators PC Interface: Analyzer User's
Guide.
Show you how to use the analyzer with the Softkey Interface; this is
•
done in the HP 64700 Emulators Softkey Interface: Analyzer User's
Guide.
Describe all analyzer commands options in alphabetical order; this
•
is done in the HP 64700 Emulators Terminal Interface: User's Refer-
ence.
Show you how to use the external timing analyzer. Timing analysis
•
is only available when using host computer interfaces such as the
PC Interface or the Sofkey Interface. Refer to the appropriate host
computer interface Analyzer User's Guide.
Show you how to cross-trigger the analyzers of multiple HP 64700
•
Series emulators over the Coordinated Measurement Bus (CMB);
this is done in the HP 64700 Emulators Terminal Interface: CMB
User's Guide.