Table of Contents
Advertisement
U>tsave
# po -o a;echo "cat > tspec";w 1;tcf;tpat;trng;tsq;tpq;tcq;tp;echo "#+#";echo
\04;po -o b
U>
U>po -s "cat tspec"
# waiting for 1 second....
tcf -c
tpat p1 addr=489
tpat p2 addr=5ff and data=39xx and stat=mw
tpat p3 addr=45a
tpat p4 addr=5ff and stat=mw
tpat p5 data!=39xx
tpat p6 addr=5fe and data=0xxf7 and stat=mw
tpat p7 any
tpat p8 any
trng addr=5f8..5ff
tif 1 p1 2
tif 2 p2 3
tif 3 p3 4
tif 4 never
tif 5 any 6
tif 6 any 7
tif 7 any 8
tif 8 never
tsq -t 4
tsto 1 none
tsto 2 all
tsto 3 all
tsto 4 all
tsto 5 none
tsto 6 none
tsto 7 none
tsto 8 none
telif 1 never
telif 2 p3 1
telif 3 p4 and p5 2
telif 4 never
telif 5 never
telif 6 never
telif 7 never
telif 8 never
tpq none
tcq time
tp -a 10
#+#
U>
After tsave has executed, there exists a file called "tspec" on the host
computer which contains the trace specification. To use the command
file to load the trace specification enter the po (port control) command
with the -s option.
Special Analyzer Topics 6-11
Advertisement
Table of Contents
