Configure The San Boot Environment - Cisco C880 M4 Configuration Manual

Configure the SAN Boot Environment

After the OS is installed, when the system is installed on the UEFI BIOS, you should set the boot path in the boot
options.
1.
Figure 54.
2.
3.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Start the system (Figure 54).
Starting the System
When the Cisco logo appears, press any key except the Enter key to display the Boot Manager main
page.
Select Boot Maintenance Manager (Figure 55).
Page 58 of 146