Cisco C880 M4 Configuration Manual page 32
With sap hana tailored datacenter integration
Hide thumbs
Also See for C880 M4:
- Service manual (132 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
Enable the SNMP Protocol under Network Configuration Network Protocols
Figure 30.
Now the system is able to respond on SNMP requests:
mgmtsrv01:/var/spool/nagios # snmpwalk
-v 2c -c public 172.23.1.100 |more
SNMPv2-MIB::sysDescr.0 = STRING: Cisco C880 M4 Management Board
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.31.1.1
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (740495) 2:03:24.95
SNMPv2-MIB::sysContact.0 = STRING: Ralf Klahr
SNMPv2-MIB::sysName.0 = STRING: CISCO-1541432026
SNMPv2-MIB::sysLocation.0 = STRING: Walldorf CISCO 4th.
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (5) 0:00:00.05
SNMPv2-MIB::sysORID.1 = OID: SNMP-MPD-MIB::snmpMPDMIBObjects.3.1.1
SNMPv2-MIB::sysORID.2 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORID.3 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.4 = OID: SNMPv2-MIB::snmpMIB
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 32 of 146
Advertisement
Table of Contents
