Figure 83.
After the initialization is complete, you are returned to the Adapter Selection screen.
Enable the BIOS
Enable the HBA BIOS so that the HBA can recognize the LUNs of the SAN storage unit and so that the system can
be started from one of them.
1.
2.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Selecting Set Adapter Defaults
On the Emulex Adapter Configuration Main Menu screen, select Set Boot from SAN <Disable>.
The screen for selecting Disable or Enable appears. Select Enable and then press the Enter key (Figure
84).
Page 80 of 146