Cisco C880 M4 Configuration Manual page 17
With sap hana tailored datacenter integration
Hide thumbs
Also See for C880 M4:
- Service manual (132 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
Figure 12.
5.
Figure 13.
6.
7.
8.
After about 1 minute, the progress bar appears. The time needed to update the firmware in a single MMB is
about 70 minutes.
9.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Logging in to the MMB
Choose Maintenance > Firmware Update and browse to the firmware file (Figure 13).
Browsing to the Firmware File
Click Update.
Wait for the firmware version check window to appear (this process takes about 5 minutes).
Verify the firmware version. Then click OK
The web user interface session is disconnected during the firmware update process. For a single MMB
configuration, log in to the web user interface again after about 5 minutes.
Page 17 of 146
Advertisement
Table of Contents
