Cisco C880 M4 Configuration Manual page 120
With sap hana tailored datacenter integration
Hide thumbs
Also See for C880 M4:
- Service manual (132 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
Confirm the multipath status with the following process:
1.
2.
3.
Figure 137. Set Legacy HardDisk Drive Order Menu (Multipath)
4.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Configure the UEFI driver on the HBA. (Refer to the sections "8-Gbps Fibre Channel Card" and "16-Gbps
Fibre Channel Card" for more information.)
From the Boot Manager main page, select Boot Maintenance Manager > Boot Options > Set Legacy
HardDisk Drive Order.
Review the screen (Figure 137). If multiple HDDs are not listed, you need to recover the multipath
connection.
After confirming the existence of multiple HDDs, reboot OS.
Page 120 of 146
Advertisement
Table of Contents
