Cisco C880 M4 Configuration Manual page 90

4.
Figure 97.
5.
Figure 98.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
The Emulex Adapter Configuration Main Menu screen appears. Select Add Boot Device and then press
the Enter key (Figure 97).
Boot Device Settings (4)
The SAN Discovery Target List screen displays the targets found in the search by the Scan for Fiber
Devices option. Select the Fibre Channel device that specifies the boot device and then press the Enter
key (Figure 98).
Boot Device Settings (5)
Page 90 of 146