Sap Hana Failover Test (Scale-Out Only) - Cisco C880 M4 Configuration Manual

With sap hana tailored datacenter integration
Hide thumbs Also See for C880 M4:
Table of Contents

Advertisement

SAP HANA Failover Test (Scale-Out Only)

It is very important to test the node failover before you release the system to the customer.
If a SAP HANA node is reset by the master name server, a log entry is written in the /var/log/messages file of the
master name server.
Aug 26 17:24:54 server01 logger: STONITH HANA Node:server05
Aug 26 17:24:55 server01 logger: anaadm Resetting the HANA Node server05
because of an Nameserver reset command
Aug 26 17:25:58 server01 logger: anaadm HANA Node server05 switched from ON to
OFF
Aug 26 17:27:00 server01 logger: anaadm HANA Node server05 switched from OFF
to ON
Aug 26 17:27:01 server01 logger: anaadm Release NFS locks of HANA Node
server05 done, system is booting
Make sure that all nodes respond to the ipmitool command.
Make sure that all management IP addresses are in the /etc/host file of the appliance.
mgmtsrv01:/opt/Cisco/scripts # grep ipmi /etc/hosts
192.168.76.28
192.168.76.29
192.168.76.37
192.168.76.38
mgmtsrv01:/opt/Cisco/scripts #
If the SAP HANA master name server is "killing" one of the nodes, a status message is written in the
/var/log/messages file of the master name server. The output looks like the following text. The default response of
the STONITH process is to reboot the node.
cishana01:/hana/shared # grep logger /var/log/messages
Aug 17 02:52:13 cishana01 logger: STONITH HANA Node:cishana02
Aug 17 02:52:13 cishana01 logger: anaadm Resetting the HANA Node cishana02
because of an Nameserver reset command
Aug 17 02:52:27 cishana01 logger: anaadm HANA Node cishana02 switched from ON
to OFF
Aug 17 02:52:35 cishana01 logger: anaadm HANA Node cishana02 switched from OFF
to ON
Aug 17 02:52:35 cishana01 logger: anaadm Release NFS locks of HANA Node
cishana02 done, system is booting
cishana01:/hana/shared #
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
server03-ipmi
server03-ipmi
server01-ipmi
server01-ipmi
server04-ipmi
server04-ipmi
server02-ipmi
server02-ipmi
Page 136 of 146

Advertisement

Table of Contents
loading

Table of Contents