Cisco C880 M4 Configuration Manual page 99
With sap hana tailored datacenter integration
Hide thumbs
Also See for C880 M4:
- Service manual (132 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
Figure 111. Device Manager Menu
Note:
If you are updating the 16-Gbps Fibre Channel card firmware (for example, the boot BIOS), check the
WWN after the firmware update. To clearly identify the mounting location of the 8-Gbps Fibre Channel card, record
the host name (the name that identifies the Cisco C880 M4 Server), mounted card, mounting slot location, BUS
number, and DEV number. For the BUS number and slot number, check the BUS number and slot number of the
target HBA from the IOU menu and PCI_Box menu of the MMB web user interface. The BUS number is the middle
of the three numbers delimited by slashes in the Seg/Bus/Dev item.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 99 of 146
Advertisement
Table of Contents
