Cisco C880 M4 Configuration Manual page 93

10. To register the sadump dump device, repeat step 3. If you do not want to register the dump device,
11. On the Emulex Adapter Configuration Main Menu screen, select Delete Boot Device and then press the
Figure 103. Boot Device Settings (10)
12. Confirm the registration of the boot device that was set with Commit Changes. In the following example,
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
proceed to step 11.
Enter key (Figure 103). Here, confirm only the registration status of the boot device that was set with
Commit Changes.
LUN 0007 is confirmed as connected to the target WWN: 207100B 5D6A0510 (Figure 104).
Page 93 of 146