Autostart Sap Hana - Cisco C880 M4 Configuration Manual
With sap hana tailored datacenter integration
Hide thumbs
Also See for C880 M4:
- Service manual (132 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
Make sure that all MMB IP addresses are in the /etc/host file of the appliance.
mgmtsrv01:/opt/Cisco/scripts # grep ipmi /etc/hosts
192.168.76.28
192.168.76.29
192.168.76.37
192.168.76.38
mgmtsrv01:/opt/Cisco/scripts #
The Python class will be called from the master name server of the SAP HANA database. Therefore, the Python
class must be mentioned in the global.ini file.
Autostart SAP HANA
If you prefer to have the SAP HANA system started automatically after a reset, you can enable the autostart
function in the instance profile of SAP HANA. You will need to configure this function in all instance profiles.
server01:/hana/shared/ANA/profile # vi ANA_HDB00_server01
...
..
Autostart = 1
...
..
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
server03-ipmi
server03-ipmi
server01-ipmi
server01-ipmi
server04-ipmi
server04-ipmi
server02-ipmi
server02-ipmi
Page 135 of 146
Advertisement
Table of Contents
