Acquire An Hba Wwn - Cisco C880 M4 Configuration Manual

Acquire an HBA WWN

Confirm the WWN of the HBA for which setup is currently being performed.
1.
Figure 81.
2.
Note that the I/O Unit (IOU) and PCI_Box screens of the System menu display the PCI-Express Slots items. The
Emulex Fibre Channel EFI-Bios Utility screen uses hexadecimal notation for the displayed values, and the MMB
web user interface uses decimal notation (Table 3).
Table 3.
PCI Express (PCIe) Slots
PCI Slot Number
0
1
2
3
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Select Display Adapter Info (Figure 81). The WWN of the HBA is displayed as the node name.
Selecting Display Adapter Info
Check the information. The MMB web user interface displays the slot containing the mounted HBA as the
PCI-Express Slots item whose Seg, Bus, and Dev values match the Seg#, Bus#, and Dev# values on the
Emulex Adapter Configuration Main Menu screen.
MMB Web User Interface Display
Power Status Slot Status
Standyby Not present
On OK
On OK
Standby Not present
Link Width Seg/Bus/Dev
x8 0/13/0
x8 0/14/0
PCIe Card Information
Firmware Version
-
-
-
-
Page 78 of 146