Bond Linux Ethernet Interfaces - Cisco C880 M4 Configuration Manual

SUSE
Set the run level to 3 to disable the x-environment:
linux:~ # vi /etc/inittab
# The default runlevel is defined here
id:3:initdefault:
SUSE
Disable unnecessary services:
linux:~ # chkconfig alsasound off
linux:~ # chkconfig cups off
linux:~ # chkconfig boot.kdump off
linux:~ # chkconfig boot.md off
linux:~ # chkconfig boot.lvm off
linux:~ # chkconfig lvm_wait_merge_snapshot off
linux:~ # chkconfig postfix off
linux:~ # chkconfig smartd off
linux:~ # chkconfig smb off
linux:~ # chkconfig smbfs off
linux:~ # chkconfig splash off
linux:~ # chkconfig splash_early off
linux:~ # chkconfig xdm off
linux:~ # chkconfig ntp on

Bond Linux Ethernet Interfaces

You usually must have a redundant network environment for a successful and stable system configuration. Only
active-standby configurations are recommended for this configuration.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 124 of 146