Record The Wwn Information Of The Fibre Channel Port - Cisco C880 M4 Configuration Manual
With sap hana tailored datacenter integration
Hide thumbs
Also See for C880 M4:
- Service manual (132 pages) ,
- Operating manual (58 pages) ,
- Service supplement manual (27 pages)
Table of Contents
Advertisement
Figure 110. Restarting the System (3)
4.
While the Cisco logo is displayed, press any key except Enter.
Record the WWN Information of the Fibre Channel Port
Using the design diagram for the SAN boot environment, refer to the WWN address information assigned to the
Fibre Channel port of the 16-Gbps Fibre Channel card of each server.
Confirm the WWN with Port Name in the Adapter Selection menu. The menu appears after the Emulex
Configuration Utility restarts (Figure 111).
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 98 of 146
Advertisement
Table of Contents
