Configure Bios Settings - Cisco C880 M4 Configuration Manual

Configure BIOS Settings

Before you configure BIOS settings, you should check for new system firmware.
1.
Figure 16.
2.
3.
Figure 17.
4.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
To check for new system firmware, go to http://www.cisco.com/. Choose Support and search for the Cisco
C880 M4 (Figure 16).
Checking for New Firmware
Before you can set up the correct performance BIOS settings, you need to configure console redirection.
Open a web browser and connect to the IMC web user interface as explained previously.
On the homepage, choose System > Console Redirection Setup > IPv4 Console Redirection Setup
(Figure 17).
Cisco C880 M4 Console Redirection for Keyboard, Video, and Mouse (KVM)
Enter an IP address and select Enable for both the Video Redirection and Virtual Media options. Click
Apply at the bottom of the page
Page 21 of 146