Pole Mount 2 Nd Display Installation - Advantech WP-75-10/40 User Manual

Bezel free all-in-one modular wall-mount pos system wp-75 series

Table of Contents

Pole Mount 2

1. Turn off the system power properly through the operating system, then turn off any external

devices.

2. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION:

3. Secure the pole mount base with four screws.

4. Carefully slide the pole display module into base's hole, ensuring it is plugged securely in the base's

hole.

Display Installation

Regardless of the power-on state, voltage is always present on the main board as

long as the system is plugged into an active AC outlet. You must disconnect the

power cord to avoid damage to the internal components of the system.

Pole Mound Base

Table of Contents

Wp-75**-**20/50 Wp-75**-**30/60

Pole Mount 2 Nd Display Installation - Advantech WP-75**-**10/40 User Manual