Table of Contents
Advertisement
2.5 Navigating the Display
2.5.1
Setting Time and Date
In the Date/Time options, you can change the year, month, date, time,
time zone, or select automatically adjust for Daylight Saving Time. To set
or change the date and time:
1.
Select Start > Settings > Control Panel > Date/Time
2.
To change the year, select the year or open a numeric dial. Select
the up arrow to increase the value; select the down arrow to
decrease the value. Or you can type a new value in the field.
3.
Select the month to open a pull-down list of months or press the
arrow buttons on either side of the month to increase or decrease
the month.
4.
To change the time, select the hour, minute, second, or AM/PM
value, then select the up arrow to increase the value or select the
down arrow to decrease the value, or type a new value into the
field.
5.
Select the correct time zone from the pull-down list.
6.
To automatically adjust the clock for Daylight Saving Time, enable
the checkbox at the bottom of the screen.
7.
Select Apply to save your changes [and make additional modifica-
tions] or select OK to exit the Date/Time settings.
Figure 2.14: Date/Time properties
39
Chapter 2
Advertisement
Table of Contents
