Opening System Box - Advantech WP-75**-**10/40 User Manual

Opening System Box

CAUTION:
1. Turn off the system power properly through the operating system, then turn off any external
devices.
2. Disconnect the power cord from the power outlet and disconnect any external devices.
3. Remove two thumb screws indicated at the rear of the main LCD display, and then remove IO cover.
4. Unplug all cables from the IO ports of the POS system.
5. Unscrew two screws
main LCD display upward slowly from hing
To prevent loss of work and damage to the system or drive:
If you are inserting or removing a drive, shut down the operating system
properly, turn off the system, and unplug the power cord. Do not remove a drive
while the system is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While
handling a drive, avoid touching the connector.
that attach the monitor to the hinge as shown below to remove
and remove it.
it. Next, slide
11