Rear Mount Vfd Installation - Advantech WP-75-10/40 User Manual

Bezel free all-in-one modular wall-mount pos system wp-75 series

Table of Contents

Rear Mount VFD Installation

1. Turn off the system power properly through the operating system, then turn off any external

devices.

2. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION:

3. Remove logo indicated on the back of main LCD display.

4. Connect VFD cable to the KBTR connector of VFD KBTR board.

5. Secure the VFD module with two screws.

Regardless of the power-on state, voltage is always present on the main board as

long as the system is plugged into an active AC outlet. You must disconnect the

power cord to avoid damage to the internal components of the system.

Table of Contents

Wp-75**-**20/50 Wp-75**-**30/60