Fusing Unit; Replacing The Fusing Unit (Part Of The Fusing Maintenance Kit) - Ricoh 5510L Service Manual

FUSING UNIT

3.7 FUSING UNIT
3.7.1 REPLACING THE FUSING UNIT (PART OF THE FUSING
MAINTENANCE KIT)
1. Open the left cover [A].
2. Remove the stopper screw (green) located below the rear side lever [B]
(brown).
3. Push down levers [B].
4. Remove the fusing unit [C].
!
CAUTION
1. Since the temperature of the fusing unit is very high, exercise caution
to avoid being burned.
2. If you install all parts in the fusing maintenance kit at the same time, be
sure to clear the PM counter (Fusing Unit).
[B]
3-28
14 June, 2002
[C]
[A]
H310R952.WMF